How SAVA works

Supply is minted once, to the factory, then deposited as a single-sided V3 position: all of it sits on one side of the starting tick, so the pool opens holding the coin and none of the quote. The first buyer walks the price from there.

Total supply

1,000,000,000 tokens

1% of supply

10,000,000 tokens

Creation fee

None — only network gas

Pool fee tier

1% (PRJX fee 10_000 / tick spacing 200)

Liquidity

100% locked in SavaLocker

Token CA

CREATE2 salt mined in the browser so the address ends in 0777

New creates initialize sqrtPriceX96 so quote-per-token ≈ seed quote / 1B (0.0000x), not 1:1. Mcap = price × 1B. A 1:1 init is the $94B FDV bug DEX Screener also reports. Existing TEST books are locked forever and cannot be repriced. See price / mcap.

A coin is priced against one ERC-20 chosen at launch. That set is the factory allowlist on chain 999. Tokenized-stock quotes are wrapped xStocks (wNVDAx, wSPCXx). SPY is not allowlisted on this factory.

USDC and USD₮0 are issuer-controlled. PURR, UPUMP, and xStocks are volatile in their own right. A coin quoted in any of them takes on that token’s risk on top of its own.

Trades go through PRJX against the coin’s pool. This site does not publish a live quoter API. Buy and sell from a token page or on PRJX directly.

Venue

PRJX (Uniswap V3 fork) on HyperEVM

Pool fee

~1% per swap in the SAVA pool

Price

Quote per 1 token (0.0000x). Mcap = price × 1B.

Routing

Direct in the quote token. Multi-hop HYPE routes are PRJX’s, not SAVA’s.

Charts

DEX Screener hyperevm slug — not Hyperliquid L1.

SAVA has no graduation step. There is no bonding curve, no migrate call, and no on-chain badge threshold. The pool at launch is the pool forever.

Because the position is locked, accrued pool fees are the only thing anyone can take out. A V3 pool collects in both tokens; the two sides go different places. Split is snapshotted at launch (70/30 on this factory).

Swap fee

1% of every trade in the SAVA pool

Quote side

70% to the snapshotted creator, 30% to the platform

Meme-token side

70% burned (SavaToken.burn — totalSupply falls), 30% to the platform

Claiming

Anyone calls SavaLocker.collectAndSplit(token)

Launch fee

None

Fees accrue inside the pool until someone claims. A claim sweeps everything since the last one. The creator quote share pays the wallet stored at lock time — not whoever holds the coin.

SavaToken caps a single wallet at 2% of supply for the first 366 blocks after launchBlock. Factory, pool, and address(0) are exempt. After the window there is no max-wallet rule. Token ownership is renounced at the end of create.

Window

366 blocks (~6 minutes on HyperEVM)

Max wallet during window

2% of supply

After the window

No restrictions

A takeover is meant to move the creator’s 70% share of future quote-token fees to a community wallet. It does not touch the locked LP, the pool, anyone’s coins, or the price. It does not pay past unclaimed fees to the new wallet.

Live SavaLocker snapshots the creator at launch and has no takeover function today. Applications are not open. See CTO.

A locked pool is not a price floor. Read the short version on /risks.

• Transactions are irreversible. Nothing here can be undone or refunded.
• Tokens routinely go to zero. Only the liquidity is locked — the price is not, and locked liquidity is not a floor.
• A coin quoted in USDC, USD₮0, PURR, UPUMP, or an xStock carries that token’s risk as well as its own.
• USDC and USD₮0 issuers can freeze balances or pause transfers.
• Starting prices are launcher-supplied ticks, not an oracle and not a promise. H-4 residual: a mempool actor can createPool+initialize first. The factory then skips initialize and uses live slot0. The UI re-reads slot0 before signing; a race can still land between that read and the create tx.
• SAVA MARKET is experimental and unaudited. It is independent of PerpMe and PRJX aside from using PRJX infrastructure.
• Nothing on this site is investment advice.

Chain

HyperEVM (Hyperliquid) — chain ID 999

Native token

HYPE, 18 decimals

RPC

https://rpc.hyperliquid.xyz/evm

Explorer

https://hyperevmscan.io

Small blocks

~1 second, 3M gas (Hyperliquid docs)

Big blocks

~1 minute, 30M gas (Hyperliquid docs)

The public RPC is rate limited. A SAVA create does not fit in a 3M small block — turn big blocks on from Create, then off for ordinary trades. See Big blocks.

Create is tested against the popular HyperEVM wallets below — not MetaMask only. Connect uses the RainbowKit connector the user picks. Chain reads and switchChain go through that connector’s provider. SAVA never assumes window.ethereum is the connected wallet.

Phantom

wallet_switchEthereumChain to 999. HyperEVM is built-in — never addEthereumChain.

MetaMask

switchChain; wallet_addEthereumChain on 4902.

Coinbase Wallet

Coinbase SDK switchChain.

Rabby

EIP-6963 injected switchChain; addEthereumChain if the chain is missing.

WalletConnect

WalletConnect session switchChain to 999.

WalletConnect QR appears only when NEXT_PUBLIC_WALLETCONNECT_PROJECT_ID is a real 32-hex Cloud id. Phantom has HyperEVM built in — pick Phantom in Connect; do not add a custom network. Before Launch, SAVA prompts a switch to 999 instead of hard-failing.

Live H-4 factory and locker on 999. Entry point is SavaFactory.create. HyperEVMScan source is Exact Match (C-1). Sourcify also exact-matches the repo. 70/30 is unchanged. Internal review + C-1 verified — no independent firm audit. Platform fees still pay a hot EOA until Safe cutover. Board: Go / no-go.

SavaFactory

0xB65e316685f8E128770A0417C5B3ae9635513187

SavaLocker

0x1ae03F1f2005ab9fb4c9766f131246217a678D79

Fee receiver

0x4c8B1cd85De9Db9aee3fD87506af3626a967827a

PRJX and HyperEVM deployments — not SAVA’s.

PRJX V3 factory

0xFf7B3e8C00e57ea31477c32A5B52a58Eea47b072

Position manager

0xeaD19AE861c29bBb2101E834922B2FEee69B9091

Swap router

0x1EbDFC75FfE3ba3de61E7138a3E8706aC841Af9B

Quoter

0x239F11a7A3E08f2B8110D4CA9F6B95d4c8865258

WHYPE

0x5555555555555555555555555555555555555555

Index the factory and locker. There is no public tokenlist or REST API on this site.

TokenLaunched

Factory. Token, creator, quote, pool, nftId, name, symbol, metadataURI, fee bps.

PositionLocked

Locker. Token, creator, nftId, quote, fee bps.

FeesCollected

Locker. memeToBurn, memeToPlatform, quoteToCreator, quoteToPlatform.

Amounts are in the pool’s two tokens. Quote amounts are native wei only when the coin is quoted in WHYPE. Do not read every quote amount as HYPE.

The factory stores one short string, metadataURI — an ipfs:// or https:// pointer to JSON (or the image itself). Create hosts the attached artwork off-chain. It never writes a data: URI or base64 blob into initcode (EIP-3860). There is no SAVA IPFS gateway and no tokenlist.json.

SAVA does not publish a Uniswap token list. There is no tokenlist.json on this site. Resolve name, symbol, and metadataURI from TokenLaunched, then fetch the JSON for the logo.

No public REST or Graph API. This site is not perpme.fun/dex-sync. Index factory and locker logs yourself. Circulating-supply endpoints are not offered.

No public inbox is published. Do not send a seed phrase, private key, or wallet to anyone claiming to be SAVA. Nothing on this site will ever ask for those.